Do I need to code or use the CLI?

No. The whole flow runs in the browser. Connect a wallet or paste a private key, fill the form, and sign one transaction. The tool builds the mint, uploads metadata, and applies authority settings for you.

What does revoking mint authority do?

Revoking mint authority permanently removes the ability to print more tokens, locking the total supply for the lifetime of the mint. Most projects revoke before listing so holders can verify supply is fixed.

Can I add a vanity or custom mint address?

Yes. Toggle the vanity address option to search for a prefix or full pattern locally in the browser, or use the custom mint option to pre-generate a fixed contract address before launch.

How much does it cost to create a token?

You pay a small platform fee plus the Solana network cost for rent and signature, which together are typically well under one SOL for a standard launch. The fee summary shows the breakdown before you confirm.

Can I edit the token name or logo later?

Only if update authority is still active. Use the Update Metadata tool to change name, description, image, or social links. If you revoke update authority during creation, the metadata becomes immutable.

Which wallets are supported?

Phantom, Solflare, Backpack, and any Solana wallet that supports standard transaction signing. You can also use a local signer by pasting a base58 or array-format private key for self-custody flows.

Solana Token Creator

Connect wallet in top bar

This Solana token creator is a no-code token maker for launching standard SPL tokens in minutes. Set your token name, symbol, supply, decimals, logo, and social links from one interface. You can also revoke authorities, choose a custom mint pattern, or clone an existing token before launch.

Token Info

Name *

Symbol *

Description (optional)

Supply & Decimals

Decimals

Total Supply

Image

Upload Logo

PNG, JPG, GIF, WEBP · Max 5MB · Recommended size: 200×200 pixels

Social (Optional)

Authority

Revoke Mint Authority+0.05 SOLRevoke Freeze Authority+0.05 SOLRevoke Update Authority+0.05 SOL

Preview

Token Name

SYMBOL

Standard SPL

Mint address (CA)

Unknown

Supply0

Decimals9

MintFreezeUpdate

Description

No description

Cost breakdown

Base Platform Fee0.1 SOL

Network Fee (estimated)~0.02 SOL

Total0.12 SOL

Wallet Balance—

Custom Mint Address+0.05 SOL

Vanity Address+0.1 SOL

About this tool

What it does

Creates a standard Solana SPL token with name, symbol, supply, image, social links, and full authority controls in one signed transaction from the browser.

How it works

Connect a wallet or paste a private key, fill the form, choose authority and vanity options, then confirm one transaction that mints the token and uploads metadata.

Why use it

No code, no Anchor setup, no CLI. Live preview, transparent fees, optional vanity mints, and one-click revoke flows make a launch ready in minutes instead of hours.

How to create a Solana token in 3 steps

Set token details and image
Enter token name, symbol, decimals, and total supply. Upload a PNG, JPG, GIF, or WEBP logo or paste an image URL. Add website, X, Telegram, or Discord links if needed.
Configure authorities and options
Toggle revoke mint, freeze, and update authority before launch. Optionally enable a custom mint address or vanity prefix to give the token a branded contract identity.
Review fees and create the token
Check the live preview and the fee summary which shows platform fee plus estimated network cost. Confirm the transaction and the new SPL token appears in your wallet.

What is a Solana SPL token?

An SPL token is a fungible asset issued through the Solana Program Library standard, which keeps tokens compatible with every Solana wallet, DEX, and indexer. Every token has a unique mint address that defines decimals, supply, and authorities. Mint authority controls future supply, freeze authority can lock balances, and update authority controls metadata. Most launch projects revoke mint and freeze authority before listing on a DEX so holders can trust the supply is fixed.

Key features

No-code creation — Fill a form, sign one transaction, get a live SPL token with metadata uploaded automatically
Authority controls — Toggle revoke mint, freeze, and update authority directly inside the creation flow
Live preview panel — See how the token will appear in wallets and explorers before signing
Custom mint and vanity options — Pre-generate a mint keypair or search for a vanity prefix in the browser
Image and metadata pipeline — Upload PNG, JPG, GIF, or WEBP logos with social links saved on-chain
Wallet flexibility — Use Phantom, Solflare, Backpack, or a local private key signer for self-custody
Transparent pricing — Platform fee plus estimated Solana network cost shown before you confirm

What to do after

Make Immutable

Revoke all remaining authorities in one final lock step for holder trust

Multi Sender

Distribute the new token to many wallets in a single batch run

Create LP

Open a Raydium, Meteora, or Orca pool to make the token tradable

Update Metadata

Refresh logo, description, or social links on the token any time

Ready to launch your Solana token?

Set token details, configure authorities, review the fee summary, then confirm one signed transaction to mint a fully on-chain SPL token in seconds.

Frequently asked questions

Token Creator guideHow it works, step-by-step usage, and FAQs.Learn more

Solana Token Creator

Connect wallet in top bar

Token Info

Name *

Symbol *

Description (optional)

Supply & Decimals

Decimals

Total Supply

Image

Upload Logo

PNG, JPG, GIF, WEBP · Max 5MB · Recommended size: 200×200 pixels

Social (Optional)

Authority

Revoke Mint Authority+0.05 SOLRevoke Freeze Authority+0.05 SOLRevoke Update Authority+0.05 SOL

Preview

Token Name

SYMBOL

Standard SPL

Mint address (CA)

Unknown

Supply0

Decimals9

MintFreezeUpdate

Description

No description

Cost breakdown

Base Platform Fee0.1 SOL

Network Fee (estimated)~0.02 SOL

Total0.12 SOL

Wallet Balance—

Custom Mint Address+0.05 SOL

Vanity Address+0.1 SOL

About this tool

What it does

Creates a standard Solana SPL token with name, symbol, supply, image, social links, and full authority controls in one signed transaction from the browser.

How it works

Connect a wallet or paste a private key, fill the form, choose authority and vanity options, then confirm one transaction that mints the token and uploads metadata.

Why use it

No code, no Anchor setup, no CLI. Live preview, transparent fees, optional vanity mints, and one-click revoke flows make a launch ready in minutes instead of hours.

How to create a Solana token in 3 steps

Set token details and image
Enter token name, symbol, decimals, and total supply. Upload a PNG, JPG, GIF, or WEBP logo or paste an image URL. Add website, X, Telegram, or Discord links if needed.
Configure authorities and options
Toggle revoke mint, freeze, and update authority before launch. Optionally enable a custom mint address or vanity prefix to give the token a branded contract identity.
Review fees and create the token
Check the live preview and the fee summary which shows platform fee plus estimated network cost. Confirm the transaction and the new SPL token appears in your wallet.

What is a Solana SPL token?

Key features

No-code creation — Fill a form, sign one transaction, get a live SPL token with metadata uploaded automatically
Authority controls — Toggle revoke mint, freeze, and update authority directly inside the creation flow
Live preview panel — See how the token will appear in wallets and explorers before signing
Custom mint and vanity options — Pre-generate a mint keypair or search for a vanity prefix in the browser
Image and metadata pipeline — Upload PNG, JPG, GIF, or WEBP logos with social links saved on-chain
Wallet flexibility — Use Phantom, Solflare, Backpack, or a local private key signer for self-custody
Transparent pricing — Platform fee plus estimated Solana network cost shown before you confirm

What to do after

Make Immutable

Revoke all remaining authorities in one final lock step for holder trust

Multi Sender

Distribute the new token to many wallets in a single batch run

Create LP

Open a Raydium, Meteora, or Orca pool to make the token tradable

Update Metadata

Refresh logo, description, or social links on the token any time

Ready to launch your Solana token?

Set token details, configure authorities, review the fee summary, then confirm one signed transaction to mint a fully on-chain SPL token in seconds.

Frequently asked questions

Token Creator guideHow it works, step-by-step usage, and FAQs.Learn more

Solana Token Creator

What it does

How it works

Why use it

How to create a Solana token in 3 steps

Set token details and image

Configure authorities and options

Review fees and create the token

What is a Solana SPL token?

Key features

What to do after

Ready to launch your Solana token?

Frequently asked questions

Do I need to code or use the CLI?

What does revoking mint authority do?

Can I add a vanity or custom mint address?

How much does it cost to create a token?

Can I edit the token name or logo later?

Which wallets are supported?

Solana Token Creator

What it does

How it works

Why use it

How to create a Solana token in 3 steps

Set token details and image

Configure authorities and options

Review fees and create the token

What is a Solana SPL token?

Key features

What to do after

Ready to launch your Solana token?

Frequently asked questions

Do I need to code or use the CLI?

What does revoking mint authority do?

Can I add a vanity or custom mint address?

How much does it cost to create a token?

Can I edit the token name or logo later?

Which wallets are supported?

You might like