Is this a Sol Incinerator alternative?

Yes. The terminal covers the same single-token cleanup use case but adds row-level preview, multi-wallet runs, retry-only-failed, LP filtering, and Token-2022 support. That makes it easier to manage larger burn jobs than a basic burner page can offer. Note: this tool is built specifically for Solana SPL and Token-2022 assets. If you are looking for a sol incinerator for BNB or other chains, this page does not support those networks, it is a Solana-only burning terminal.

Can I burn the full balance, a percent, or a fixed amount?

Yes. Three burn modes are available: Full Burn empties the row, Partial Burn applies a percent of the available balance, and Specific Burn uses a fixed amount per row. Planned values update live as you change modes.

How does Multi Wallet + Single CA mode work?

Paste one private key per line and provide a target mint address. The tool scans each wallet for that token, loads balances into rows, and prepares burn actions across all valid wallets in one coordinated batch.

What does Retry Failed do exactly?

Retry Failed runs only rows whose status is FAILED from the previous run. Successful and idle rows are skipped, so you can resolve transient RPC or congestion issues without rebuilding the entire execution set.

Does burning reduce total supply?

Yes. The burn instruction permanently removes the burned amount from circulating supply for that mint. This is different from Revoke Mint, which stops future minting but does not destroy tokens that already exist. To stop new supply being minted entirely, follow up with Revoke Mint Authority.

Can I burn LP tokens with this tool?

Yes. The terminal detects LP-style rows from token name and symbol and shows them with an LP badge. Toggle Only LP Tokens to filter the table down to LP rows when liquidity cleanup is the focus.

What is the Solana burn address?

In practice, there is no single destination you manage manually on this page. The tool handles the burn instruction directly, while the Solana burn address concept usually refers to where tokens are sent or destroyed in burn-related discussions. Here, you select rows and the transaction handles the permanent removal at execution time.

What is the difference between burn and revoke mint?

Burning destroys existing token balances and reduces circulating supply. Revoke Mint Authority prevents any new supply from being created in the future. Teams often use both actions together, burn first for supply cleanup, then run Revoke Mint to lock supply permanently afterward.

Solana Token Burner

FREE

Connect wallet in top bar

This Sol Incinerator alternative helps you burn Solana tokens with full, partial, or specific amount modes from one advanced terminal. Scan wallets, filter balances, review planned burns, and execute batch transactions with visibility over fees and row status. It is built for operators who need to burn Solana tokens across one or many wallets, not just a basic single-token flow for cleanup.

Burn Terminal

Mode

Burn Mode

Target Mint (CA)

Selected Wallets0Rows0Selected Token USD$0.00Planned Burn0.000000Planned Burn USD$0.00Estimated Tx0Success0Failed0Frozen0

Token Rows

Only LP Tokens

SelWalletTokenAvailPlanStatus

No token rows yet. Run scan to load tokens.

About this tool

What it does

Burns SPL or Token-2022 balances across one or many wallets in a single batch. Choose Full, Partial, or Specific amount mode, review every row, and execute with retry support.

How it works

Scan the connected wallet or paste private keys for a Multi Wallet + Single CA run. Pick the burn mode, review planned amounts, USD estimates, and fees, then execute the batch.

Why use it

More control than a basic Sol Incinerator clone. Row-level status, retry-only-failed, LP filtering, Token-2022 support, and clear pre-execution preview keep large burn jobs auditable. For teams searching for a Sol Incinerator alternative with more operator control, this terminal offers deeper batch visibility.

How to burn Solana tokens in 3 steps

Choose mode and scan tokens
Pick Wallet Scan to load balances from the connected wallet, or Multi Wallet + Single CA to target one mint across pasted private keys. Click Scan Wallet Tokens to load rows.
Pick burn mode and select rows
Select Full Burn, Partial Burn (percent), or Specific Burn (fixed amount). Filter LP tokens if needed, select rows, and confirm planned burn values match your cleanup plan.
Execute and retry failed rows
Review fees, total planned burn, and USD estimates. Click Execute Burn to send transactions. If any row fails, use Retry Failed to rerun only the unsuccessful rows. Transaction fees and estimated costs are shown before you confirm so you can review the full burn plan including any reclaimed SOL from closed positions.

What is token burning on Solana?

Burning a token destroys an exact amount of supply by sending it to a special burn instruction that the token program treats as permanent removal. It reduces circulating supply for that mint and is often used for cleanup of unwanted balances, LP token withdrawals, vesting milestones, or supply-management decisions. Burning is permanent on-chain, once confirmed, the burned amount cannot be restored from this tool or any other on-chain instruction. Many users search for a sol incinerator or solana incinerator when they need this kind of permanent supply removal on the Solana blockchain. Burning is commonly used to remove unwanted tokens or clean up wallet balance entries that are no longer needed. After burning, the affected token accounts may hold locked SOL as rent, which can be reclaimed by closing the empty token account separately. This process is different from sending tokens to another wallet; burning permanently removes them on-chain with one instruction.

Key features

Two scan modes — Wallet Scan reads connected wallet, Multi Wallet + Single CA targets one mint across many private keys
Three burn modes — Full Burn empties balances, Partial applies a percent, Specific uses a fixed amount per row
Row-level preview — Wallet, token, available amount, planned burn, and USD estimate visible before execution
LP token filter — Toggle Only LP Tokens to focus on liquidity pool token rows during cleanup
Token-2022 support — Handles both classic SPL and Token-2022 program balances from one terminal
Retry failed flow — Rerun only the rows that failed last attempt instead of rebuilding the whole batch
Free to use. No platform fee; the only cost is the tiny Solana network fee shown before execution

What to do after

Revoke Mint

Permanently lock supply so no new tokens can be minted later

Make Immutable

Remove all remaining authorities in one final lock step

Multi Sender

Distribute remaining tokens to many wallets in one batch

Close Account

Reclaim locked SOL from empty token accounts after burning

Ready to burn tokens?

Scan wallets, pick the burn mode, review planned rows and fees, then click Execute Burn to remove balances with full batch visibility.

Frequently asked questions

Token Burner guideHow it works, step-by-step usage, and FAQs.Learn more

Solana Token Burner

FREE

Connect wallet in top bar

Burn Terminal

Mode

Burn Mode

Target Mint (CA)

Selected Wallets0Rows0Selected Token USD$0.00Planned Burn0.000000Planned Burn USD$0.00Estimated Tx0Success0Failed0Frozen0

Token Rows

Only LP Tokens

SelWalletTokenAvailPlanStatus

No token rows yet. Run scan to load tokens.

About this tool

What it does

Burns SPL or Token-2022 balances across one or many wallets in a single batch. Choose Full, Partial, or Specific amount mode, review every row, and execute with retry support.

How it works

Scan the connected wallet or paste private keys for a Multi Wallet + Single CA run. Pick the burn mode, review planned amounts, USD estimates, and fees, then execute the batch.

Why use it

How to burn Solana tokens in 3 steps

Choose mode and scan tokens
Pick Wallet Scan to load balances from the connected wallet, or Multi Wallet + Single CA to target one mint across pasted private keys. Click Scan Wallet Tokens to load rows.
Pick burn mode and select rows
Select Full Burn, Partial Burn (percent), or Specific Burn (fixed amount). Filter LP tokens if needed, select rows, and confirm planned burn values match your cleanup plan.
Execute and retry failed rows
Review fees, total planned burn, and USD estimates. Click Execute Burn to send transactions. If any row fails, use Retry Failed to rerun only the unsuccessful rows. Transaction fees and estimated costs are shown before you confirm so you can review the full burn plan including any reclaimed SOL from closed positions.

What is token burning on Solana?

Key features

Two scan modes — Wallet Scan reads connected wallet, Multi Wallet + Single CA targets one mint across many private keys
Three burn modes — Full Burn empties balances, Partial applies a percent, Specific uses a fixed amount per row
Row-level preview — Wallet, token, available amount, planned burn, and USD estimate visible before execution
LP token filter — Toggle Only LP Tokens to focus on liquidity pool token rows during cleanup
Token-2022 support — Handles both classic SPL and Token-2022 program balances from one terminal
Retry failed flow — Rerun only the rows that failed last attempt instead of rebuilding the whole batch
Free to use. No platform fee; the only cost is the tiny Solana network fee shown before execution

What to do after

Revoke Mint

Permanently lock supply so no new tokens can be minted later

Make Immutable

Remove all remaining authorities in one final lock step

Multi Sender

Distribute remaining tokens to many wallets in one batch

Close Account

Reclaim locked SOL from empty token accounts after burning

Ready to burn tokens?

Scan wallets, pick the burn mode, review planned rows and fees, then click Execute Burn to remove balances with full batch visibility.

Frequently asked questions

Token Burner guideHow it works, step-by-step usage, and FAQs.Learn more

Solana Token Burner

What it does

How it works

Why use it

How to burn Solana tokens in 3 steps

Choose mode and scan tokens

Pick burn mode and select rows

Execute and retry failed rows

What is token burning on Solana?

Key features

What to do after

Ready to burn tokens?

Frequently asked questions

Is this a Sol Incinerator alternative?

Can I burn the full balance, a percent, or a fixed amount?

How does Multi Wallet + Single CA mode work?

What does Retry Failed do exactly?

Does burning reduce total supply?

Can I burn LP tokens with this tool?

What is the Solana burn address?

What is the difference between burn and revoke mint?

Solana Token Burner

What it does

How it works

Why use it

How to burn Solana tokens in 3 steps

Choose mode and scan tokens

Pick burn mode and select rows

Execute and retry failed rows

What is token burning on Solana?

Key features

What to do after

Ready to burn tokens?

Frequently asked questions

Is this a Sol Incinerator alternative?

Can I burn the full balance, a percent, or a fixed amount?

How does Multi Wallet + Single CA mode work?

What does Retry Failed do exactly?

Does burning reduce total supply?

Can I burn LP tokens with this tool?

What is the Solana burn address?

What is the difference between burn and revoke mint?

You might like